Esterline CMA-9000 Скачать руководство пользователя

Страница: 772 / 802

OPERATOR’S

MANUAL

CMA-9000 FLIGHT MANAGEMENT SYSTEM

Page E-22

November 19, 2009

ADVISORY
MESSAGE

DESCRIPTION ACTION

APPLICABLE
CONFIGURA-TION

AMU FAILED

The FMS has detected a failure
of the AMU or a failure of the
AMU communication bus

Control the AMU from another
source.
Advise maintenance.

AMU interface

AMU CH1 FAILED
AMU CH2 FAILED
AMU CH3 FAILED

The FMS has detected a failure
of a particular AMU Audio Board.

Use another channel to
control the AMU.
Advise maintenance.

AMU interface

APIRS FAILED

The FMS has detected a failure
of the identified APIRS or a
failure of the APIRS
communication bus.

Ensure that APIRS is
powered.

Verify if APIRS operates
normally.

Advise maintenance.

APIRS interface

APU FAILED

The FMS detects a failure or a
loss of communication with the
APU.

Be aware that the total fuel
flow does not include the APU
fuel flow; inform maintenance.

APU Interface

APU FUEL FLOW
FAILED

The FMS detects it is not
receiving the fuel flow from the
APU or the received fuel flow is
invalid.

Be aware that the total fuel
flow does not include the APU
fuel flow; inform maintenance.

APU Interface

ATC1 ALT FAILED
ATC2 ALT FAILED

The FMS has detected a failure
of the transponder altitude bus.

Do not use transponder Mode
C capability.

Advise maintenance.

•

ATC transponder

interface

•

ATC transponder name

configured as ATC

ATC1 FAILED
ATC2 FAILED

The FMS has detected a failure
of the ATC transponder or a
failure of the ATC transponder
communication bus.

Control the ATC transponder
from another source.

Advise maintenance.

•

ATC transponder

interface

•

ATC transponder name

configured as ATC

ATOS FAILED

The FMS detects a failure or a
loss of communication with the
Airborne Tactical Observation
and Surveillance System.

Ensure that ATOS is
powered.

Verify if ATOS operates
normally.

Advise maintenance

•

ATOS interface

AUTO RESET

Upon an exceptional fault the
FMS has restarted.

The unit has detected a
problem and has attempted to
restart. No action required
except to verify it is
functioning as expected.

Advise maintenance.

All configurations

BORESIGHT
DISCREPANCY

Discrepancy between the
boresight values of the EGI and
the newly entered FMS INS
values.

Enter new values for roll,
pitch, and yaw boresight in
the EGI - BORESIGHT 1/1
maintenance page.

EGI interface

CAPT EHSI
FAILED

Failure of the Capt. EHSI or
failure of the Capt. EHSI
communication bus.

Ensure that Capt EHSI is
powered. Verify if EHSI
operates normally.
Map display available on F/O
EHSI.
Advise maintenance.

EHSI interface

This page is printed under user's responsibility

and must not be retained for reference

Содержание CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CMA-9000

Отзывы:

Похожие инструкции для CMA-9000

Бренды по названию

Популярные бренды

Esterline CMA-9000, Руководство оператора

Результаты поиска

Содержание CMA-9000

Отзывы:

Похожие инструкции для CMA-9000

Бренды по названию

Популярные бренды