Esterline CMA-9000 страница 775 Скачать руководство пользователя

Страница: 775 / 802

OPERATOR’S

MANUAL

CMA-9000 FLIGHT MANAGEMENT SYSTEM

Page E-25

Revision 2 March 01, 2010

ADVISORY
MESSAGE

DESCRIPTION ACTION

APPLICABLE
CONFIGURA-TION

F/O EHSI FAILED

The FMS has detected a F/O
EHSI input failure or a F/O EHSI
communication bus failure

Ensure that F/O EHSI is
powered. Verify F/O EHSI
operates normally.
Map display available on
Capt. EHSI.
Advise maintenance.

EHSI interface

GLONASS FAILED
GLONASS1
FAILED
GLONASS2
FAILED

The FMS has detected a failure
or a loss of communication with
the GLONASS sensor.

NOTE: GLONASSx is displayed
in a multiple-FMS configuration
only.

Advice maintenance.

GLONASS interface
configured

GPP FAILED

The FMS detects a failure to
communicate with Gessellschaft
fur Prozessrechner
Programmierung (GPP) unit.

GPP Receiver is no longer
operational.

Advise maintenance

HCS, FM1, FM2, UHF
interfaces

GPS ANTENNA
FAILED

The EGI GPS in DR mode and
not using satellite data for
navigation as it is not tracking
any satellite for more than 5
seconds.

Advise maintenance.

EGI LN-100GT or SIGMA-
50H configured.

GPS BATTERY
LOW

The EGI GPS battery is low or
has failed.

Advise Maintenance.

EGI interface

GPS (EGI) FAILED

FMS detected a failure of the
GPS in the identified EGI
sensor.

Advise Maintenance.

EGI interface

GPS FAILED
GPS1 FAILED
GPS2 FAILED

The FMS has detected a failure
of the GPS unit or a failure of the
GPS unit communication bus

Entry of date and time may be
required. Functions requiring
GPS position/time will not
operate.
Advise maintenance.

GPS interface
Multi-FMS installations

GPS ZEROIZE
FAILED

Failure in the zeroization
process of the SA/AS key.
The FMS automatically selects
the next best sensor for
navigation.

GPS cannot be used for
navigation.
Advise maintenance if the
message is persistent.

EGI interface

HF FAILED

The FMS detects a HF radio
failure.

Ensure that HF radio is
powered.
Verify that the HF radio
operates normally.
Advise maintenance.

Installations in which the
HF radio is configured.

IFF FAILED

The FMS detects a failure or a
loss of communication with the
IFF.

Ensure that IFF transponder
is powered.
Verify that the IFF
transponder operates
normally.
Advise maintenance.

Installations in which the
IFF transponder is
configured.

INS FAILED

INS function in EGI has failed.

INS cannot be used for
navigation.
Advise maintenance if the
message persists.

EGI interface

INS/GPS FAILED

Communication failure with the
EGI.

INS/GPS cannot be used for
navigation.
Advise maintenance if the
message persists.

EGI interface

IRSx BAT WARN

ADIRS DC input power out of
range.

Call maintenance.

ADIRS interface configured

This page is printed under user's responsibility

and must not be retained for reference

Содержание CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CMA-9000

Отзывы:

Похожие инструкции для CMA-9000

Бренды по названию

Популярные бренды

Esterline CMA-9000, Руководство оператора

Результаты поиска

Содержание CMA-9000

Отзывы:

Похожие инструкции для CMA-9000

Бренды по названию

Популярные бренды