![Esterline CMA-9000 Скачать руководство пользователя страница 526](http://html1.mh-extra.com/html/esterline/cma-9000/cma-9000_operators-manual_2429635526.webp)
OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-80
November 19, 2009
SECTOR [5L]:
Appears when configured. The status “ACT” (reverse video cyan) is appended to the prompt if
an activated sector search pattern is in the inactive flight plan. Pressing the line select key:
•
If SAR waypoint is not defined or is part of the Route, display the SECTOR page.
•
If SAR waypoint is entered in the field REF ID of the DES+SAR page, display the RTE x LEGS 1/X page with
the identifier and /S qualifier in the scratchpad allowing entry anywhere in the flight plan.
HOLD [3R]:
Pressing the line select key:
•
If HOLD waypoint is entered in the field REF ID of the DES+SAR page, yield to the same behaviour as
pressing the HOLD hard key. The HOLD page appears if a holding pattern already exists; otherwise, the
RTE x LEGS 1/X page appears with /H in the scratchpad. The HOLD page has a NEW HOLD LSK to allow a
new holding pattern to be defined.
•
If HOLD waypoint is entered in the field REF ID of the DES+SAR page, display the RTE x LEGS 1/X page
with the identifier and /H qualifier in the scratchpad.
FLY OVER [6L]:
Pressing the line select key:
•
If Fly Over waypoint is not entered in the field REF ID of the DES+SAR page, display the RTE x LEGS 1/X
page with only /O in the scratchpad.
•
If Fly Over waypoint entered in the field REF ID of the DES+SAR page, display the RTE x LEGS 1/X page
with the identifier and /O in the scratchpad.
RADIAL-TO [4R]:
Pressing the line select key:
•
If Radial-to waypoint is not entered in the field REF ID of the DES+SAR page, display the RTE x LEGS 1/X
page with only the /R qualifier in the scratchpad.
•
If Radial-to waypoint is entered in the field REF ID of the DES+SAR page, display the RADIAL-TO page with
the identifier in the ID field. The NEW RADIAL-TO field will display the LEGS page for insertion in the route.
TACT DTO [5R]:
Appears when the MILITARY NAVIGATION option is configured. Pressing the line select key:
•
If Tactical Direct-to waypoint is not entered in the field REF ID of the DES+SAR page, display the RTE x
LEGS 1/X page with only /T in the scratchpad.
•
If Tactical Direct-to waypoint is entered in the field REF ID of the DES+SAR page, display the RTE x LEGS
1/X page with the identifier and /T in the scratchpad.
DIRECT-TO [6R]:
Pressing the line select key:
•
If Direct-to waypoint is not entered in the field REF ID of the DES+SAR page, display the RTE x LEGS 1/X
page.
•
If Direct-to waypoint is entered in the field REF ID of the DES+SAR page, display the RTE x LEGS 1/X page
with the identifier in the scratchpad.
This page is printed under user's responsibility
and must not be retained for reference