OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-25
November 19, 2009
NAVIGATION RADIOS (ADF Page 2/2)
This page allows the pilot to control the operation of up to 2 ADF units.
NOTE: This page is only displayed if radio test is configured.
Display the second ADF RADIO page from the horizontal configuration by pressing [RADIO], <ADF#>, [NEXT]
or [RADIO], [NEXT], <ADF#>, [NEXT] or [RADIO], [RADIO], <ADF#>, [NEXT].
Display the second ADF RADIO page from the vertical configuration by pressing [RADIO], [NEXT], <ADF#>,
[NEXT] or [RADIO], <RADIO DETAILS>, <ADF#>, [NEXT] or [RADIO], [RADIO], <ADF#>, [NEXT].
NOTE:
The ADF ident suffix "x" (e.g. ADF, ADF1...) and the side (left or right) where the ADF units appear
are depending on the installation configuration.
ADF1 TEST [5L]:
Toggles ADF1 test status & results. Toggle options for test status are READY, CONFIRM?,
STARTED. Pressing LSK the first time causes CONFIRM? to appear the second press initiates the tests. Test
result is: PASS or FAIL or TIMEOUT.
ADF2 TEST [5R]:
Same
as above, but referencing ADF2 instead of ADF1.
RADIO [6L]:
Access to the RADIO top level page where the ADF radio is located.
1 R
2 R
3 R
4 R
5 R
6 R
ADF
2/2
A D F 1 T E S T A D F 2 T E S T
>
R E A D Y R E A D Y
<
<
RADIO
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference