OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-104
November 19, 2009
NEAREST VHF NAV 1/X (also applicable for NEAREST NDB, CUSTOM WPT, and USER WPT)
Display the NEAREST VHF 1/X page by pressing [INIT REF], <NEAREST> and <VHF NAV>.
{also applicable for NEAREST NDB, CUSTOM WPT AND USER WPT}.
This page provide an ordered list of the closest 50 VHF Navigation Aids defined as follows: within a 640 nm radius
around the aircraft present position, the 50 waypoints closest to the center reference waypoint are displayed. The
bearing and distance from the center reference waypoint are displayed under each waypoint identifier. The
bearings and distances are refreshed every 10 seconds in the NEAREST USER WPT page, and in the other
nearest pages they are refreshed every 10 seconds when the center reference waypoint is the present position or
a user waypoint. A maximum of 8 waypoints are displayed per page. When accessing the page, the first VHF NAV
on the page 1/X (or subsequent pages) is displayed in reverse video. The selection change by pressing any active
LSK (corresponding to a nearest VHF NAV).
WPT LIST [1L-4L], [1R-4R]:
Selection of the LSK select the respective VHF NAV and display it in reverse
video. The waypoint identifier corresponding to the selected key is copied into the scratchpad if it is available. Each
new selection of an LSK updates the scratchpad with the corresponding waypoint identifier. For the NEAREST
USER WPT page, when a user waypoint is deleted by cross-talk, no sorting is done and the user waypoint is
blanked. When a user waypoint is created by cross-talk, no sorting is triggered for the nearest USER WPT list.
DIRECT-TO [5L]:
Transfer the highlighted waypoint to the first waypoint on the LEGS page and display the
LEGS page.
NEAREST [6L]:
Selection of this LSK return to the NEAREST 1/1 page.
REF ID [5R]:
Entry of any waypoint identifier from the navigation database, the custom database, the user
database, the temporary waypoints list, the active route or the inactive route.
Whenever the REF ID center is modified, the list is recalculated and re-ordered by proximity using the new
entered center reference waypoint In the case of multiple waypoints with the same identifier, the SELECT WPT
page is displayed for selection.
After cold start or when [CLR] key is entered in this field PPOS is set as the center reference waypoint.
DES+SAR [6R] or TACTICAL [6R]:
When TACT key is configured, the DES+SAR prompt is replaced by
TACTICAL. In this case, the prompt gives access to the TACTICAL page instead of the DES+SAR page.
Access to DES+SAR 1/Y (or TACTICAL 1/Y) page. If there is a valid position in the scratchpad, it will
automatically be converted to a temporary waypoint and placed in the REF ID field on the DES+SAR 1/Y (or
TACTICAL 1/Y) page. If there is a valid identifier in the scratchpad, it will automatically be placed in the REF ID
field on the DES+SAR 1/Y (or TACTICAL 1/Y) page.
1 R
2 R
3 R
4 R
5 R
6 R
NEAREST VHF NAV 1/5
I D / B R G / D I S I D / B R G / D I S
M R S
M L
0 3 6
o
/ 0 . 0 9 N M 3 0 6
o
/ 0 . 7 3 N M
M B O M T G
1 2 7
o
/ 5 . 9 9 N M 2 4 2
o
/ 6 . 3 8 N M
A N A V N
3 3 5
o
/ 3 1 . 2 N M 3 2 9
o
/ 3 9 . 2 N M
L U C D G N
0 9 4
o
/ 4 5 . 5 N M 0 4 9
o
/ 5 0 . 8 N M
<
DIRECT-TO
R E F I D
P P O S
<
NEAREST
DES+SAR
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
