![Esterline CMA-9000 Скачать руководство пользователя страница 272](http://html1.mh-extra.com/html/esterline/cma-9000/cma-9000_operators-manual_2429635272.webp)
OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-70
November 19, 2009
ACT/MOD/" " RTE x (title):
ACT indicates that the EXECuted CARP procedure is active (CARP Active
discrete is on).
MOD indicates the CARP procedure modifications have not been EXECuted yet. A blank field indicates the
CARP procedure:
•
Is in the active flight plan, but is not considered Active yet (CARP Active discrete is OFF), or
•
The CARP procedure for the Inactive route is being displayed.
Also, RTE x (where 'x' can be 1 or 2) indicates for which route the current CARP procedure is being displayed.
PI ELEV [1L]:
Point of Impact (PI) elevation (feet) above Mean Sea Level (MSL). Range [-1000…9999]. The
maximum sum of the DROP HAT and PI ELEV is 19999 feet.
SD DIST [1R]:
Display and entry of Slowdown Distance (nm), defined as the distance from the Slowdown point
(SD) to the CARP green light waypoint (CRP). The default is the FMS computed value. If insufficient CARP
parameters are available to compute a value, the FMS displays dashes until sufficient parameters are available,
at which time the default value is displayed. Manual entry overrides the FMS computed value. Manual entry
range: 0.0 to 99.9 nm.
DROP IAS/HAT [2L]:
Mission Indicated Air Speed (knts) and Height Above Terrain (HAT) (ft) planned for the
drop. The default is boxes. A manual entry is required. When the entered HAT is less than the entered VERT
DIST value, an invalid data entry message is displayed. Range [50...175] / [0...19999]. The maximum sum of
DROP HAT and PI ELEV is 19999 feet. DROP HAT value must be greater than the ACUATION HAT for CUST
HARP. DROP HAT value must be greater than the entered safety factor for CUST HAHO.
DROP TEMP [2R]:
Static air temperature ((C) at the drop altitude. The default is the FMS value taken from the
ADC at the current altitude corrected for temperature deviation. Manual entry may override. When temperature
from ADC is not available, the standard day temperature deviation is used to compute the temperature at the
drop altitude. If the drop HAT has not yet been entered, the ADC static air temperature is displayed, if available.
Otherwise dashes are displayed. Range [-99.9…99.9]
ACTUATION HAT [3L]:
Displayed for CUST HARP only. Height, in feet, above PI where the parachute cord is
pulled. Actuation HAT must be less than the entered DROP HAT, and greater than the entered DECEL DIST.
Default display is boxes. Manual entry is required. Range [0…19999].
SAFETY FACTOR [3L]:
Displayed for CUST HAHO only. A safety buffer (ft) from exit to assembly of
parachutists under canopy and for assembly at a certain altitude once they arrive over the drop zone. The safety
factor must be less than the entered DROP HAT. Default value is 2,000 feet. Range [0…5000].
WIND [3R]:
Access to the CRP01 WIND page.
MEAN WIND [4L]:
Mean Effective Wind (MEW) direction and speed (() /(kt) or (T)/(kt) from PI altitude to drop
altitude to be used in the FMS CARP calculations. Unit used depends on current display setup (true or
mag).The default display is computed by the FMS based on current and predicted wind at the mission altitude. A
manual entry is allowed. If a ground wind is entered (GROUND WND), then the displayed value is modified to
take into account both the FMS predicted value at the drop altitude and the entered ground wind. Range
[0…360] / [0…99]. Not displayed for CUST HARP.
This page is printed under user's responsibility
and must not be retained for reference