OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-13
November 19, 2009
SEARCH PATTERN USING THE SEARCH AND RESCUE MENU
1. Display the SQUARE/SECTOR/LADDER 1/1 page by pressing [INIT REF], <DES+SAR> or
<TACTICAL>, and choose one of the three search patterns.
2. Define a search pattern origin by either entering a previously defined ID (Nav, Custom, User database
or Temporary waypoint), or by defining a position relative to a REF ID (Nav, Custom, User database or
Temporary waypoint).
3. Verify the search parameters and arm the search by pressing the <ACTIVATE> and [EXEC] keys.
NOTE:
This method of initiating a search pattern inserts the designated search pattern origin at the top of
the ACT
LEGS page and initiates a
Direct-To
navigation to the search pattern origin.
SEARCH PATTERN AT PRESENT POSITION (IN FLIGHT ONLY)
1. Display the default values of the search parameters SQUARE/LADDER/SECTOR 1/X page by pressing
[INIT REF], <DES+SAR> or <TACTICAL> (LSK 6R), and <SQUARE> (LSK 3L), or <LADDER> (LSK 4L), or
<SECTOR> (LSK 5L).
The MOD RTE x SQUARE 1/1 page is displayed. Press [NEXT] or [PREV] to select a different search
pattern. The PPOS prompt is displayed at LSK 5L.
2. Select the present position search mode by pressing SEARCH PPOS (LSK 6R).
The MOD RTE x SQUARE/SECTOR/LADDER 1/1 page is displayed with the search waypoint identifier
shown as "PPOS". If necessary, modify the search parameters following the manual entry procedure
described above.
1 R
2 R
3 R
4 R
5 R
6 R
RTE 1 SQUARE 1/1
I D T R A C K S P A C I N G
1.0
N M
R E F I D
S A R B R G
000
T
A C T I V E S A R
N O N E
<
PPOS
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference