OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-72
November 19, 2009
I.
After EXECution, but prior to hold entry (exit type AT TGT ALT displayed):
ACT/MOD/" "(title):
MOD indicates the holding pattern has not been executed. ACT indicates that the aircraft
has entered the holding pattern. A blank field indicates the holding fix has not yet been reached or the route is
inactive.
FIX [1L]:
The waypoint identifier of the holding fix. Assigned PPOS for holding pattern at present position.
TURN DIR [2L]:
Holding pattern turn direction (right or left).
INBD CRS [3L]:
Holding pattern in-bound course to fix. Defaults to inbound course of the preceeding leg to
FIX (0° to 360°).
LEG TIME/DIS [4L]:
Holding pattern inbound leg time or leg distance: When a slash ('/') character is entered,
the entry is interpreted as the leg distance, otherwise, the entry is interpreted as the leg time. When leg time is
entered, the leg distance field displays dashes and when leg distance is entered, the leg time field displays
dashes.
Holding pattern inbound leg time: Defaults to 1.0 minute at or below 14,000 feet and 1.5 minutes above 14,000
feet.
Holding pattern inbound leg distance: Dashes normally displayed, valid range is between 1.0 nm to 99.9 nm.
EXIT TYPE [5L]:
•
MANUAL - indicates that exit from the holding pattern must be manually initiated (via Direct-To or pressing
EXIT HOLD).
•
ONCE - indicates automatic exit at the fix after completion of entry procedure. (Normally used in lieu of a
standard procedure turn).
•
AT TGT ALT - indicates automatic exit at the fix after reaching an altitude. The latter types are from the
navigation database.
When this LSK is pressed the exit type toggles between ONCE or AT TGT ALT to MANUAL, it can not be
toggled back to the previous exit type unless the change is erased. When the exit type is MANUAL, the ">"
symbol is not displayed since the MANUAL exit type cannot be changed. The symbol ">" is also not displayed
when the inactive route is displayed since changing the exit type is only allowed in the active route. Changing
the exit type when the holding pattern status is EXIT ARMED has the same effect as pressing the RESUME
HOLD prompt.
NEW HOLD [6L]:
Displayed only if there is no route modification in process. Access to the RTE LEGS 1/X
page to define a new holding pattern (/H in scratchpad).
CANCEL [6L]:
{If ERASE MODS is configured as CONFIRM} Cancel the changes made to the inactive route.
1 R
2 R
3 R
4 R
5 R
6 R
RTE 1 HOLD 1/1
F I X S P D / T G T A L T
FA23 210/ 5000A
T U R N D I R F I X E T A
>
LEFT
Z
I N B D C R S
050
o
L E G T I M E / D I S
1.0
M I N /
- - . -
N M
E X I T T Y P E S T A T U S
A T T G T A L T I N A C T I V E
<
NEW HOLD
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
