OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-9
November 19, 2009
5. Press the LSK corresponding to the field where the search pattern needs to be inserted in the flight plan.
The MOD RTE x SQUARE 1/1 page (the search page corresponding to the LSK pressed in step 4) is
displayed with the respective waypoint displayed in the ID field.
6. If necessary, change the pattern type by pressing [PREV] or [NEXT]. In the case shown above, by pressing
once the [NEXT] functional key, the MOD RTE x LADDER 1/1 page is displayed. Another press of the
[NEXT] functional key will display the MOD RTE x SECTOR 1/1 page.
7. If necessary, change the pattern parameters (TRACK SPACING, LEG LENGTH, SAR BRG, DIAMETER
and ANGLE).
8. Press ACTIVATE (LSK 6R) and the EXEC functional key.
The waypoint identifier followed by “/S” is inserted in the flight plan and the CMA-9000 FMS will provide
guidance for the defined search pattern as soon as the search origin will be reached.
A third possibility for defining a search pattern at a route waypoint is the following:
1. Display the DES+SAR or TACTICAL 1/2 page and select the search pattern by pressing one of the search
pattern prompts provided on LSK 3L (SQUARE), LSK 4L (LADDER), LSK 5L (SECTOR).
The search pattern page is displayed.
1 R
2 R
3 R
4 R
5 R
6 R
RTE 1 SQUARE 1/1
I D T R A C K S P A C I N G
1.0
N M
R E F I D
S A R B R G
000
º
A C T I V E S A R
N O N E
<
PPOS
1 L
2 L
3 L
4 L
5 L
6 L
1 R
2 R
3 R
4 R
5 R
6 R
MOD
RTE 1 SQUARE 1/1
I D T R A C K S P A C I N G
ARRIE 1.0
N M
R E F I D
-----
S A R B R G
281
T
M A X G S A C T I V E S A R
7 2 K T S Q U A R E
<
ERASE
ACTIVATE
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference