OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page E-49
November 19, 2009
DATA ENTRY
ADVISORY
MESSAGE
DESCRIPTION ACTION
APPLICABLE
CONFIGURA-TION
!SELECT
TRANS/APPR/RWY
Selection of the STAR transition
or approach or runway is required
before the STAR waypoints can
be loaded into a route from the
navigation database.
Select STAR transition,
approach, or runway as
appropriate.
All configurations
!SELECT
TRANS/RUNWAY
Selection of the SID transition or
runway is required before the SID
waypoints can be loaded in route
from the navigation database.
Select SID transition or runway
as appropriate.
All configurations
!TACT APPR
DATA MISSING
The FMS detects that there is
mandatory data missing from the
TACTICAL APPR page after the
crew has attempted to insert the
tactical approach runway
threshold waypoint. by pressing
the EXECute CMA-9000 Display
Panel hard key.
Enter all mandatory fields
require to define tactical
approach.
If tactical approach is
configured
!TACT APPR IN
PROGRESS
The FMS detects that that the
crew is attempting to redefine an
already entered tactical
approach when one of the five
waypoints for the already
existing tactical approach is the
active waypoint (e.g. TO
waypoint)
Ensure that no tactical
approach procedure waypoint
is the TO. Then proceed with
modification to the tactical
approach procedure.
If tactical approach is
configured
!TE TO IP OUT OF
RANGE
The entered TE or IP position on
the CARP PLAN pages causes
the distance from the TE to IP
waypoints to be greater than
50NM. Message is enabled
when the CARP function is
configured.
Correct TE or IP position on
the CARP PLAN pages.
Configurations supporting
CARP/HARP
!TE TO PI OUT OF
RANGE
The entered TE or PI position on
the CARP PLAN pages causes
the distance from the TE to PI
waypoints to be greater than
20NM. Message is enabled
when the CARP function is
configured.
Correct TE or PI position on
the CARP PLAN pages.
Configurations supporting
CARP/HARP
!TEMP DATABASE
FULL
Temporary database is full (99
waypoints or 50 waypoints with
the first three letters are different).
Use existing temporary
waypoints or reload the custom
route (for waypoints not in
Navigation database).
All configurations
!TEMP OFST OUT
OF RANGE
The FMS detects that the
difference between the current
FMS position and the entered
temporary position update is
greater than or equal to 100 NM.
Enter a temporary offset
position less than 100 NM
from current aircraft position.
Configurations supporting
CARP/HARP
This page is printed under user's responsibility
and must not be retained for reference