![Esterline CMA-9000 Скачать руководство пользователя страница 124](http://html1.mh-extra.com/html/esterline/cma-9000/cma-9000_operators-manual_2429635124.webp)
OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
5-34
November 19, 2009
A. INACTIVE ROUTE MANIPULATIONS (SUMMARY)
1. Using the procedures outlined in Section 3, enter the origin, destination, and waypoints, or select a
stored custom route as the inactive route. Next, press <CONFIRM>, (LSK 6R) to save the modifications
or <CANCEL> (LSK 6L) to delete them.
NOTE: In the case of a dual CMA-9000 FMS installation, the inactive route modification is cross-talked to the off-
side FMS upon pressing the <CONFIRM> prompt.
If the EFIS model permits, the EFIS displays the inactive flight plan in cyan when an inactive route page is
displayed on the FMS.
2. The inactive route is edited directly on the ROUTE, LEGS, DEP/ARR and HOLD pages. Both active and
inactive routes have their own independent set of ROUTE, LEGS, DEP/ARR, FUEL and HOLD pages.
3. To ACTIVATE the inactive route, press LSK 6R on the inactive RTE page, followed by pressing the
[EXEC] key.
NOTE: The following RTE COPY procedures highlight the basic steps required to select, then activate a second
route.
B. INACTIVE ROUTE MANIPULATIONS (DETAILED STEPS)
1. To copy the active route, e.g. RTE 1, to the inactive route, press LSK 5L of the inactive RTE page. RTE
1 remains active and continues to be used for navigation.
2. Press LSK 6R to CONFIRM copying of the route. ERASE RTE2 appear at LSK 4L when RTE 2 is
defined.
NOTE: The copied route contains the current active TO and subsequent waypoints. Overflown waypoints are
not copied.
In the case of a dual CMA-9000 FMS installation, the inactive route is crosstalked to other FMU's upon
each CONFIRM of flight plan changes and upon synchronization.
1 R
2 R
3 R
4 R
5 R
6 R
RTE 2 1/2
O R I G I N D E S T
KSEA PANC
R U N W A Y F L T N O
23R AS007
R O U T E
KSEAPANC1
CO ROUTES
>
<
RTE COPY USER ROUTES
>
<
CANCEL
S A V E ?
CONFIRM
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference