OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
12-22
November 19, 2009
4. Toggle the prompt at (LSK 5R) to change the surface type.
The velocities are displayed in reverse video when the ANV353 DVS receives invalid velocity data or
when the DVS is in TEST.
When the DVS mode is SEA or CALM SEA (RDN 85 only) the CMA-9000 FMS corrects the Doppler
velocities for the water motion.
Enter water motion compensation on page DVS STATUS 2/2.
1.
Display the DVS STATUS 1/2 page via the NAV STATUS INDEX 1/1 page and [NEXT].
2. When the CMA-9000 FMS cannot compute the wind, the current wind direction and speed (in knots) are
displayed in large fonts. Enter the wind direction and speed. Otherwise the value is displayed in medium font
and manual entries are not permitted. When the scratchpad is empty and A/C is outside the polar region
(latitude between N73 and S60), pressing LSK 1L will toggle between the True and Magnetic display
options.
NOTE: The system wind being displayed here is the same as may be observed on the PROGRESS 1/4 page.
For the DVS, the wind value is used by the CMA-9000 FMS in the estimation of surface water current.
1 R
2 R
3 R
4 R
5 R
6 R
DVS STATUS 1/2
V E L O C I T I E S
V X
+ 2 5 . 5
K T S
V Y
+ 5 . 5 6
K T S
V Z
+ 2 5 0 0
F T / M I N
M O D E
OPER
B E A M S T A T U S R F M O D E
3-BEAMS
CONTINUOUS
<
S T A T U S S U R F A C E
LAND
AUTO
<
<
NAV STATUS
1 L
2L
3 L
4 L
5 L
6 L
1R
2R
3R
4R
5R
6R
DVS STATUS 1/2
V E L O C I T I E S
V X
+ 2 5 . 5
K T S
V Y
+ 5 . 5 6
K T S
V Z
+ 2 5 0 0
F T / M I N
M O D E
OPER
B E A M S T A T U S R F M O D E
3-BEAMS
INTERMITENT
<
S T A T U S S U R F A C E
SEA
SEA
<
<
NAV STATUS
1L
2L
3L
4L
5L
6L
This page is printed under user's responsibility
and must not be retained for reference