Esterline CMA-9000, Руководство оператора

Страница: 455 / 802

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page A-9
November 19, 2009
TK/GS [2R]: Track angle and ground speed of a moving Bulls Eye Target waypoint. This field is only displayed
if the selected Bulls Eye Target is a moving waypoint. Entry is allowed on this field only when the Bulls Eye
Target is manually defined.
TYPE [3L]: Waypoint selection type: FIXED or MOVING. Toggling this field is allowed only when the Bulls Eye
Target is
manually defined and is not in the flight plan, and the moving waypoints are configured.
MSL ALT [3R]: MSL altitude of the Bulls Eye Target waypoint in feet. Default value is dashes and the
minimum/maximum values are -1000/65535 feet.
REF WPT ID [4L]: Reference waypoint identifier with dashes as default value. Entry of an ID triggers a search
in all the FMS databases for the requested waypoint. Once the selected waypoint is determined, its position will
be displayed in the REF WPT POS field, the RAD/DIS and the TGT ID will be reset to their default values and
the POS and BRG/DIS fields will be automatically updated. Entering a moving waypoint as a reference will use
the moving waypoint's position computed at the moment of the entry.
RAD/DIS[4R]: Radial/distance from the reference position to the desired Bulls Eye Target waypoint position.
The values are blanked when no REF WPT POS is defined, otherwise zeros are displayed as the default
values. No entries are allowed when the fields are blanked. Manual entry automatically updates the POS and
BRG/DIS fields. RAD and DIS values may be entered individually or simultaneously; a ‘/’ symbol preceding a
value in the scratchpad indicates only the DIS value must be updated. The minimum/maximum values for the
radial are 0/360 degrees and 0/999 NM for the distance.
REF WPT POS [5L]: Reference position with dashes as default value. It corresponds to the position of the REF
WPT ID or a manually entered value. Upon entry of a value, the RAD/DIS and the TGT ID fields are reset to
their default values, the REF ID field will be set to dash symbols and the POS and BRG/DIS fields will be
automatically updated.
SARSAT WPT [6L]: Access to the SARSAT WPT page. Displayed only if a DF is configured.
CANCEL [6L]: Cancels modifications or deletion of the Bulls Eye Target waypoint. Upon cancellation of a
modification, all
the fields return to their previous values.
DES+SAR [6R] or TACTICAL [6R]: When TACT key is configured, the DES+SAR prompt is replaced by
TACTICAL. In this case, the prompt gives access to the TACTICAL 1/Y page instead of the DES+SAR 1/Y
page. Access to the DES+SAR (or TACTICAL) page and sets the Bulls Eye Target waypoint as reference
waypoint.
CONFIRM [6R]: Confirms a modification or deletion of the Bulls Eye Target waypoint. Confirmation of a
modification is rejected when either no position or no tk/gs have been entered. Upon confirmation of the deletion
of the Bulls Eye Target waypoint, all fields are reset to their default values. Note: Unless confirmation is
requested for a deletion, changes are still allowed while CONFIRM is on the screen.
(SAVE?): Displayed between the CANCEL/CONFIRM prompts upon modification of the Bulls Eye Target
waypoint.
(DELETE?): Displayed between the CANCEL/CONFIRM prompts upon deletion of the Bulls Eye Target
waypoint.
This page is printed under user's responsibility
and must not be retained for reference