OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
9-8
November 19, 2009
B. ON A MANUALLY ENTERED INBOUND COURSE (COURSE INTERCEPT)
With the identifier of the desired direct-to waypoint in the scratchpad:
1. Display the first ACT LEGS page by pressing LEGS.
2. Move the waypoint identifier to the TO WPT field by pressing LSK 1L.
3. Key in the inbound course.
4. Select the direct-to intercept mode by pressing INTC CRS (LSK 6R).
The "INTC" prompt is displayed, at the LSK 6R location, with the scratchpad inbound course shown in LARGE
font size. The scratchpad inbound course is also copied to the TO WPT course. If the current track/heading
will not intercept the inbound course prior to reaching the TO WPT, a “NOT ON INTERCEPT TRK” or "NOT
ON INTERCEPT HDG" advisory message will be displayed.
5. Verify the course and distance of the leg to the TO WPT.
NOTE: If the aircraft track/heading is incorrect, turn the aircraft to the correct track/heading prior to pressing
EXEC key.
6. Make the direct-to leg active by pressing EXEC.
The "MOD" status in the title line is replaced by "ACT". Navigation and guidance change to the new leg from
present position to intercept the inbound course to the TO waypoint on the current track/heading.
NOTE: If a new heading clearance is received to intercept the inbound course, steering aircraft to new heading
and re-engaging LNAV will cause the CMA-9000 FMS to fly the new intercept heading.
This page is printed under user's responsibility
and must not be retained for reference