OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-14
November 19, 2009
3. Verify the pattern parameters.
4. Initiate an immediate search at present position by pressing the [EXEC] key.
The present position is defined at the moment the [EXEC] key is pressed.
The "MOD" status in the title line disappears.
NOTE: A search pattern at present position can only be initiated using the procedure described above while
in flight. The manual entry of "/S" cannot be used.
After EXECuting a search at the present position, PPOS/S is shown in the first position of the ACT
RTE x LEGS 1/X page. If, subsequently, a Direct -To a waypoint not existent in the current route is
performed, then the search pattern is exited, the PPOS/S is deleted from the ACT RTE x LEGS 1/X
page, and the respective waypoint is inserted in the first position of the ACT RTE
x LEGS 1/X page
followed by a discontinuity and the initial route.
1 R
2 R
3 R
4 R
5 R
6 R
MOD
RTE 1 SQUARE 1/1
I D T R A C K S P A C I N G
PPOS 5.0
N M
R E F I D
-----
S A R B R G
236
T
M A X G S A C T I V E S A R
1 6 3 K T S Q U A R E
<
ERASE
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference