![Esterline CMA-9000 Скачать руководство пользователя страница 329](http://html1.mh-extra.com/html/esterline/cma-9000/cma-9000_operators-manual_2429635329.webp)
OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-1
November 19, 2009
SECTION 13
CMA-9000 FMS PAGES - RADIO TUNING
NOTE: In the key sequences shown to display the pages, square brackets “[ ]” indicate a function key and
angle brackets “< >“ indicate a line select key (left and right softkeys).
GENERAL
The CMA-9000 FMS offers primary or backup radio tuning of navigation and communication radios. It can
provide tuning for:
•
Single or Dual DMEs (Chelton DN-441B, Collins DME-442, or Collins DME-4000)
•
Single Collins DME-42
•
Single or Dual NAVs (Chelton VN-411B, Collins VIR-432 or Collins NAV-4500)
•
Single Collins VIR-32
•
Single or Dual ADFs (Chelton DF-431B or Collins ADF-462)
•
Single or Dual COMs (Chelton VC-401B, Chelton VC-401C, Collins VHF-422, Collins VHF-4000)
•
Single or Dual VUHF radios (Marconi Selenia SRT-651N/A or SRT-651/N-F)
•
Single or Dual ATC TRANSPONDERs (Bendix-King MST-67A or Collins TDR-94D)
•
Single Audio Management Unit (TEAM)
•
Single Direction Finder (Collins DF-430-102)
•
Single HF (Collins SRT-170/M2)
•
Single IFF Transponder (SELEX Communications M425)
Tuning capabilities include active and standby frequency entry control of all radio modes (including self-test),
and a pilot entered library.
In certain installation architectures supporting multiple FMSs, the crew should attempt to tune the given radio
from any other installed FMS(s) if the original tuning attempt fails. This is valid, for example, when the FMS is
operating in independent mode (as confirmed by the INDEPENDENT OP alert message).
The CMA-9000 FMS provides control and display of the active/standby frequencies and settings of all the radios
interfaced on the RADIO Page. This page provides tuning entries and access to more detailed radio control
pages, where self-test and radio modes can be selected. Upon power-up, the CMA-9000 FMS reads from the
radios their current valid tuned frequencies and settings, or automatically tunes them to the frequencies and
settings used prior to the last power interruption. Two display formats are available for the RADIO top page: a
horizontal or a vertical presentation. In the horizontal display format, the active and standby frequencies are
displayed side by side. In the vertical display format, the active frequency is displayed on top of the standby
frequency.
This page is printed under user's responsibility
and must not be retained for reference