OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-27
November 19, 2009
C. MANUAL ENTRY OF AN AIRPORT TYPE USER WAYPOINT IN THE DATABASE
Access the USER WPT 1/2 page by pressing [INIT REF], <WPT DATA> (LSK 1R), and <NEW USER WPT>
(LSK 6L).
1. Enter the waypoint identifier in the ID field at LSK 1L.
2. Enter the position at LSK 1R or enter the Bearing/Distance at LSK 2L.
NOTE: The steps 1 and 2 can be replaced by entering a known identifier in LSK 4L and defining a
radial/distance from the reference position to the desired user waypoint position.
3. Press [NEXT] to display the USER WPT 2/2 page.
4. Toggle Identifier type (WAYPOINT, AIRPORT, VHF NAV) at LSK 1R and select AIRPORT.
5. Enter the airport ELEVATION at LSK 5R (mandatory field). When the mandatory fields are completed
(e.g. name and position of the new user waypoint), a CANCEL/CONFIRM prompt is displayed. Press
<CONFIRM> (LSK 6R) to accept or <CANCEL> (LSK 6L).
D. DELETE A USER WAYPOINT FROM THE USER DATABASE
Any existing user waypoint can be deleted from the user database by displaying the waypoint information and
then using the CLR functional key. This user waypoint deletion can be performed in several ways:
1. With the USER WPT 1/2 page displayed press the CLR functional key and then LSK 1L. The
CANCEL/CONFIRM prompt is displayed. Press <CONFIRM> (LSK 6R) to accept or <CANCEL> (LSK
6L).
1 R
2 R
3 R
4 R
5 R
6 R
USER WPT 2/2
I D F R E E =
4 5 9
T Y P E
YUL AIRPORT
>
R E G I O N
CAN/CY
E L E V A T I O N
323
F T
<
CANCEL
S A V E ?
CONFIRM
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference