OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-221
November 19, 2009
2. If the MARK hard key was pressed, the PREDEF WPT page automatically appears with the MARK ON TOP
field containing the CMA-9000 FMS position at the time the MARK key was pressed. If the MARK softkey
was pressed, the UPDATE POS page is already being displayed.
3. The user selects <UPDATE POS>, bringing forth the UPDATE POS page with the CMA-9000 FMS position
as reference. The displayed data corresponds to the positions when the MARK key was pressed.
4. The user presses <REF>, bringing forth an entry prompt (
).
5. The user enters the known position. The position may be entered directly in the UPDATE POS field, or
indirectly with an identifier with or without an offset.
6. The user selects the navigators for which a position update is sought.
7. The user presses <CONFIRM>. The CMA-9000 FMS then updates the selected navigators with the position
indicated in the UPDATE POS field.
Update by Weather Radar Joystick Position Selection {WXR or AHCAS/AHCAS2 configuration only}
1. The user selects a known position on the weather radar using a joystick.
2. The PREDEF WPT page automatically appears with the LAST JOYSTICK field containing the position
transmitted by the weather radar or received from AHCAS/AHCAS2 EFIS.
3. The user selects <UPDATE POS>, bringing forth the UPDATE POS page with JOYSTICK as reference. The
displayed data corresponds to the positions when the joystick position was received.
4. The user enters the true josytick position. The position may be entered directly or with an identifier. The
UPDATE POS field will get automatically updated by the CMA-9000 FMS.
5. The user selects the navigators for which a position update is sought.
6. The user presses <CONFIRM>. The CMA-9000 FMS then updates the selected navigators with the position
indicated in the UPDATE POS field.
Update using another navigation mode position
1. The user verifies the CMA-9000 FMS Navigation mode on the PROGRESS or POS INIT pages corresponds
to the mode from which an update position will be obtained. The user may deselect some navigation modes
by pressing [INIT REF],<NAV STATUS>, <DESELECT>.
2. The user presses the MARK key. The MARK key may be the physical hard key or the softkey on the
UPDATE POS page per CFG KEY configuration settings.
3. If the MARK hard key was pressed, the PREDEF WPT page automatically appears. If the MARK softkey
was pressed, the UPDATE POS page is already being displayed.
4. The user selects <UPDATE POS>, bringing forth the UPDATE POS page with the CMA-9000 FMS position
as reference. The displayed data corresponds to the positions when the MARK key was pressed.
5. The user selects the navigators for which a position update is sought.
6. The user presses <CONFIRM>. The CMA-9000 FMS then updates the selected navigators with the position
indicated in the UPDATE POS field.
A. Update POS 1/1 page default state, the CMA-9000 FMS position is used by default.
1 R
2 R
3 R
4 R
5 R
6 R
UPDATE POS 1/1
R E F
>
F M S ( I N S / D V S )
A C C U R
0 . 0 7
N M
N 4 5
o
2 8 . 0 8 W 0 7 3
o
4 4 . 4 8
A C C U R P O S D I F F
I N S / D V S
0 . 0 7 0 0 0
o
/ 0 . 0 0
I N S / G P S
1 . 1 0 0 9 0
o
/ 1 . 0 0
D V S
2 . 0 1 1 8 0
o
/ 2 . 0 0
<
PREDEF WPT MARK
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
