OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-60
Revision 2 March 01, 2010
PHONE STATUS (3L):
Displays the phone status.
For the GSM phone, the possible values are: CONNECTION ACTIVE, CONNECTION NOT ACTIVE,
INCOMING CALL and GSM FAULT.
For the iridium phone, the possible values are: -----------, READY, UNAVAILABLE, UNKNOWN, RINGING, IN
PROGRESS.
NOTE: Will display dashes when communication is totally lost.
SIGNAL STRENGTH [4L]:
Displays the signal strength of the phone. This field is only visible for the iridium
phone configuration.
POWER [4R]:
(not shown on figure) Turns the phone ON or OFF. Only applicable to GSM phone. Not
applicable to Iridium configuration.
NOTE: Will display dashes when communication is totally lost.
ANSWER [5L]:
Transmits an ANSWER command to the phone transceiver. When ANSWER is selected, it is
displayed in inverse green large font for 2 seconds.
For the Iridium phone: This prompt is displayed only when there is a received call, otherwise it is blank.
For the GSM phone:
in S/W 300: This prompt is displayed only when there is a received call, otherwise it is blank.
in S/W 300V and higher: This prompt is blank only if the phone is not available (e.g. failed).
HANG UP [5R]:
Transmits a HANGUP command to the phone transceiver. When HANG UP is selected, it is
displayed in inverse green large font for 2 seconds.
For the Iridium phone: This prompt is displayed only when the phone is in ringing state or a call is established,
otherwise it is blank.
For the GSM phone:
in S/W 300: This prompt is displayed only when the phone is in ringing state or a call is established,
otherwise it is blank.
in S/W 300V and higher: This prompt is blank only if the phone is not available (e.g. failed).
PHONE TOP [6L]:
Access to PHONE top page.
LIBRARY [6R]:
Access to PHONE LIBRARY page.
This page is printed under user's responsibility
and must not be retained for reference
