OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-5
November 19, 2009
D.
When the Bulls EyeTarget is fixed.
PPOS (1L):
Displays the present aircraft position bearing and distance relative to the Bulls eye waypoint. This
field is blank when the Bulls eye waypoint is not defined. The Bulls eye ident always correspond to the one
defined in the BULLS EYE 3/3 page.
REF [1R]:
Toggles the bearing/distance reference type displayed of the present aircraft position relative to the
Bulls Eye waypoint. FR: Radial (RAD) from Bulls Eye waypoint to present position. TO: Course (CRS) from
present position to Bulls Eye waypoint. The default value on cold start is FR.
TGT POS (2L,2R):
Displays the Bulls Eye Target waypoint ident. When the Bulls eye target is part of the active
route "ACT RTE" is displayed in inverse video white.
TGT POS BRG/DIS (2L,2R, 3L,3R):
Displays the Bulls Eye Target bearing/distance relative to the present
aircraft position (PPOS) and relative to the Bulls eye waypoint (BULL). The Bulls eye ident always correspond
to the Bulls eye ident defined on BULLS EYE 3/3 page. When the Bulls eye target is not defined, this field is
blank. If the Bulls eye waypoint is not defined, the bearing/distance relative to Bulls eye waypoint is blank.
RDV POS (3L,3R):
Displays the Bulls Eye Target Rendezvous ident or status. When the Bulls Eye Target
Rendezvous is achievable the ident "BERDV" is displayed, otherwise "UNACHIEVABLE" is displayed in inverse
video white. When the Bulls Eye Target is not defined or is a fixed waypoint, the field is blank.
RDV POS BRG/DIS (4L,4R):
Displays the Bulls eye Target Rendezvous bearing/distance relative to the aircraft
present position (PPOS) and relative to the Bulls eye waypoint (BULL). The Bulls eye ident always correspond
to the Bulls eye ident defined the BULLS EYE 3/3 page. When the Bulls eye target Rendezvous is not
achievable, this field is blank. If the Bulls eye waypoint is not defined, the bearing/distance relative to Bulls eye
reference is blank.
ETA/ETE [5L]:
Estimated time of arrival or estimated time en route to the Bulls Eye Target Rendezvous (or to
the Bulls Eye Target itself if it is not moving). The field is blank if the Bulls Eye Target Rendezvous is not
achievable. On selection will toggle between ETA and ETE.
NOTE: When the aircraft is on ground, if PLAN DATA page is not installed the ETE/ETA field is blank.
DELTA ALT (5R):
Displays the altitude difference between the Bulls Eye Target Rendezvous (or the Bulls Eye
Target itself if a) it is not moving or b) the Bulls Eye Target Rendezvous is unachievable) and the aircraft. The
field is blank if the Bulls Eye Target altitude has not been entered on the BULLS EYE 2/3 page.
1 R
2 R
3 R
4 R
5 R
6 R
BULLS EYE 1/3
P P O S R E F
B U L L
0 1 0
o
/ 3 3 . 0
N M
F R
<
T G T P O S
B E T G T
P P O S
0 1 2
o
/ 3 6 . 0
N M
B U L L 0 9 8
o
/ 2 6 . 0
N M
E T A D E L T A A L T
>
1 6 1 5 . 2
Z
+ 4 0 0 0
F T
<
EFIS
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
