OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-201
November 19, 2009
SARSAT:
Access the SARSAT WPT page. This prompt is not displayed for the inactive (INACT) TACTICAL
page(s).
SECTOR:
The status “ACT” (reverse video white) is appended to the prompt if an activated sector search
pattern is in the flight plan.
Case i.
No TACTICAL REF ID defined : DES+SAR point defined : Brings up the SECTOR page.
Case ii. No TACTICAL REF ID defined : Brings up the LEGS page with the identifier and /S qualifier in the
scratchpad allowing entry anywhere in the flight plan.
SQUARE:
The status “ACT” (reverse video white) is appended to the prompt if an activated square search
pattern is in the flight plan.
Case i.
No TACTICAL REF ID defined : Brings up the SQUARE page.
Case ii. TACTICAL REF ID defined : Brings up the LEGS page with the identifier and /S qualifier in the
scratchpad.
TACT APPR :
Case i.
No TACTICAL REF ID defined and no previously defined tactical approach Runway Threshold
Waypoint: Brings up the default LEGS page with the /A qualifier in the scratchpad allowing entry
in the flight plan.
Case ii. No TACTICAL REF ID defined and previously defined the tactical approach Runway Threshold
Waypoint: Brings up the TACTICAL APPR page.
Case iii. TACTICAL REF ID is already defined: Brings up the default LEGS page with the identifier with
TACTICAL DTO:
Case i.
No TACTICAL REF ID defined : Brings up the LEGS page with only /T in the scratchpad.
Case ii. TACTICAL REF ID defined : Brings up the LEGS page with the identifier and /T in the scratchpad.
TACTICAL APPR 1/3 page (if configured)
Display TACTICAL APPR 1/3 page:
1. For the active route press[TACT], <TACT APPR> if TACT key is configured and TACT APPR configured on
the TACTICAL page.
[INIT/ REF], <DES+SAR > or <TACTICAL>, [NEXT], <TACT APPR> if a valid tactical approach waypoint
had previously been entered.
For the inactive route press [TACT], <TACT APPR>, [NEXT], if TACT key is configured and TACT APPR
configured on the TACTICAL page.
[INIT/ REF], <DES+SAR> or <TACTICAL>, [PREV], <TACT APPR> if a valid tactical approach waypoint
had previously been entered The REF ID field of the TACTICAL page can optionally be used. If the crew
chooses to enter the REF ID field on the TACTICAL page and then select TACT APPR, then inserting REF
ID field tactical approach runway threshold waypoint can subsequently be entered into the flight plan by
using the method described in b) or c).
If a valid tactical approach runway threshold waypoint had not previously been entered, then upon selecting
the TACT APPR prompt, the FMS will automatically insert a /A in the scratchpad and display LEGS page
1/X. After inserting this tactical approach runway threshold waypoint into the flight plan, the TACTICAL
APPR page is displayed.
If a valid tactical approach runway threshold waypoint had previously been entered and the tactical
approach runway threshold waypoint has been sequenced in the flight plan, then the tactical approach page
showing the previously entered parameters can be displayed again by selecting TACT APPR> on
TACTICAL page.
This page is printed under user's responsibility
and must not be retained for reference
