QX1000 Manual II: Administrator's Guide
Administrator’s Menus
QX1000; (SW Version 5.3.x)
8
The
System Configuration
page contains the host name, IP
address and Subnet Mask information about the QX1000 LAN
interface. These settings make QX1000 available to the internal
network.
The
System
Configuration
page offers the following input options:
Host Name
requires a host name for the QX1000 device.
DNS suffix
requires the LAN side domain name which the QX1000
belongs to.
IP Address
requires the QX1000 host address for the LAN interface.
Subnet Mask
requires the QX1000 host’s Subnet Mask.
Fig. II-4: System Configuration Wizard - System Configuration page
The
Regional Settings and Preferences
are used to select settings
specific to the location of the QX1000. This is important for the
functionality of the voice subsystem.
The
Regional Settings and Preferences
page has two drop down
lists to select the
Location
(country) and a corresponding
Timezone
.
QX1000 will support Daylight Savings (DST) correction if it is
available for the selected time zone.
This page also has a manipulation radio button group to choose:
•
System
Language
– selection is available only when the
custom Language Pack has been uploaded and it is used
to enable custom language for system voice messages or
returning back to the default language English.
•
GUI Theme
- selection used to select the GUI theme style
of the web based configuration pages.
•
The
Choose Theme on Login
checkbox indicates
whether the GUI theme selection radio buttons should be
displayed on the QX1000 Login page. Selecting the
checkbox will allow users to choose the GUI theme before
logging into the QX1000. Leaving the checkbox unselected
will require the administrator to run the System
Configuration Wizard to change the theme.
Fig. II-5: System Configuration Wizard - Regional Settings page
The
Emergency Codes
and
PSTN Access Codes Settings
are
used to configure the emergency dial plan.
The
Emergency Codes
text field requires the PSTN numbers of the
emergency or lifeline services. Multiple emergency codes, separated
by commas, can be inserted in this field. For each emergency code,
a routing pattern will be generated in the Call Routing Table, which
will allow faster and easier calls to emergency destinations.
The
PSTN Access Code
drop down list allows you to select the
prefix code for accessing the PSTN line in the routing mode. Dialing
the digits inserted in this text field will provide the PSTN dial tone
when dialed from the handset.
Fig. II-6: System Configuration Wizard - Emergency Codes and PSTN Codes Settings page
