QX1000 Manual II: Administrator's Guide
Administrator’s Menus
QX1000; (SW Version 5.3.x)
25
Actions that are not allowed for the selected event (like mail notification if the PPP link is down or the mail server has been configured improperly)
are hidden. For multiple events editing, actions that are not appropriate for least one of the selected events will also be hidden.
If QX1000 cannot receive an IP address from the DHCP servers, or cannot register an extension on the SIP or Routing servers, or cannot reach an
NTP server, it raises only one event for the entire period the action has failed, but will continue to try. When the required action is successful QX1000
raises an appropriate message.
To Assign an Action to the Event
1.
Select the checkbox of one or more events to assign an action to them.
2.
Press the
Edit
button. The
Edit Event Settings
page appears.
3.
Select an action type from the
Action
radio buttons to notify the administrator about the event.
4.
Press the
Save
button to submit the changes or use
Back
to abort the selected action.
Time/Date Settings
The
Time and Date Settings
page provides information about the current system time and date. The settings may be updated through the
international time and date servers.
Time
is used to set the local time (hour, minute).
Date
is used to set the date (month, day, year).
Enable Simple Network Time Protocol Server
enables the SNTP (Simple Network Time Protocol) server on QX1000, thus QX1000 becomes the
timeserver for its LAN.
Enable Simple Network Time Protocol Client
enables the
SNTP client on the QX1000, thus QX1000 becomes a client to
an external timeserver. A checkbox disables Date and Time
drop down lists and enables the following parameters:
The
SNTP Servers
table lists all defined NTP Servers.
The
Add
functional button opens an
Add NTP Server
page
where a new NTP server can be defined. This page offers the
NTP Server
radio buttons that are used to choose between a
manual and a predefined NTP server.
•
Manual
requires the NTP server’s FQDN (Full Qualified
Domain Name) or its IP address.
•
Predefined
is used to select the NTP server’s host
address from the drop down list, where the most common
NTP servers are listed.
The
Move Up
and
Move Down
functional buttons are used to
sort NTP servers in the order they need to be accessed. If the
NTP server in the first position of the
SNTP Servers
table does
not answer, NTP server in the next position will try to be
reached.
Please Note:
You can add another NTP server to the list if the
defined NTP servers are not functional (for example, QX1000's
date/time is not being updated automatically).
Polling Interval
indicates the time interval for the periodical
synchronization between the timeserver and QX1000. It counts
in hours.
Attention:
Time and Date Settings
will be reset if QX1000 has
lost power.
Fig. II-37: Time and Date Settings page
Fig. II-38: Add NTP Server page
Mail Settings
The
System Mail Settings
page allows you to send warnings automatically about the board status or problems to the administrator.
System events
that require email notification are selected on the
page. System mail must be enabled and the SMTP server needs to be configured for voice
message transmission to the extension user’s mailing account.
QX1000 may automatically generate emails to the administrator:
•
If events specified in the
list occur,
