Elliott E190, Руководство по эксплуатации и обслуживанию

Страница: 16 / 358

ANSI/SIA Weather EEC-0036 V1.2
Responsibilities per
ANSI/SIA A92.2
NOTE: Unless otherwise specified, all section references in this chapter refer to
the latest version of ANSI/SIA A92.2.
Responsibilities of Dealers and Installers
A. General Responsibilities: Each dealer or installer as applicable shall comply
with the requirements of this section.
B. Vehicle Specifications: Each dealer or installer, or both, who sells an aerial
device shall inform the owner or user, or both, of the manufacturer’s minimum
vehicle specifications.
C. Vehicle Weight Distribution: The installer shall be responsible for the weight
distribution of the completed mobile unit in accordance with the requirements of
the aerial device and the applicable regulations. Allowance shall be made for the
weight of readily removable tools and material specified by the user.
D. Manuals: Upon delivery of the equipment to the owner or user, the dealer or
installer shall provide the manuals as required by Paragraph 6.4 of this standard
and manuals for auxiliary equipment added by the installer.
E. Installations: The installer shall comply with Sections 5 and 6 and shall follow
the instructions of the manufacturer. In the event the original manufacturer no
longer exists, and equivalent entity may provide these instructions. The installer
of an aerial device shall, before the mobile unit is placed in operation, perform
stability tests in accordance with the requirements of 4.5.1 and 4.5.2 , the
operational and visual tests in accordance with the requirements of 6.6.1 and
6.6.2 and the appropriate electrical tests required in 5.4.3 of this standard. The
installer shall, when installing an aerial device on a chassis which is a highway
vehicle, comply with all requirements of the applicable Federal Motor Vehicle
Safety Standards in effect at the time of installation. Certification as a
manufacturer (alteration, intermediate or final) of a motor vehicle under the
Federal Motor Vehicle Safety Standards is required. The travel height of the
mobile unit shall be posted in a location that is readily visible to the vehicle
operator. For insulated aerial devices, the installer shall assure conformance to