Elliott E190, Руководство по эксплуатации и обслуживанию

Страница: 311 / 358

Power-LED Meaning
OFF Off, Portable Control Unit is deactivated
RED Fixed ON – Transmitting data
RED
Flashing 1/1
sec.
ON – Transmitting data
Low battery! (Buzzer will emit an alarm for the first three
sequences when low level is detected)
Micro-LED Meaning
OFF Normal mode
Green
Flashing 1/3th
sec.
Micro step 1 active
2 / 3rd sec Micro step 2 active
3 / 3rd sec Micro step 3 active
4 / 3rd sec Micro step 4 active
5 / 3rd sec Micro step 5 active
Note that these LEDs are used also for error code alarms and operator controlled
functions and are then triggered by an event, the type of indication will be declared
for each event further in this document.
The Portable Control Unit uses 2 LEDs to indicate operational status, the Portable
Control Unit is also equipped with an internal buzzer that emits sounds and alarms
when required.
Typical status indications involving the Micro- and Power-LED are declared below:
6.3 Portable Control Unit status indications
Micro-LED Power-LED
Document type Document number Page Rev
Service Manual S071 C 25 of 46