Elliott E190, Руководство по эксплуатации и обслуживанию

Страница: 100 / 358

Platform Install/Operation EEC-0049 V1.1
Platform Operation
E. With boom and platform aligned, extend boom to 46.6 ft radius on LMI display
F. Lower platform arm hook into the adaptor, insert and secure horizontal pin
RIGGING PLATFORM ASSEMBLY TO RETRACTED JIB (BOOM
RETRACTED)
A. Set the platform at a 65.8 ft radius from the truck center of rotation as shown
in Figure 3.
B. Raise the platform arm to its maximum angle; refer to the platform operation
label.
C. Lower boom to minus 6.8 degrees on LMI display, align jib and platform
D. Lower platform arm hook into jib head, insert and secure horizontal pin
OR
A. Set the platform at a 65.8 ft radius from the truck center of rotation as shown
in Figure 3.
B. Raise the platform arm to approximately 7 degrees angle; refer to the platform
operation label for operation details.
C. Lower boom to maximum possible negative angle, align jib and platform
D. Raise jib head into platform arm hook, insert and secure horizontal pin
RIGGING PLATFORM ASSEMBLY TO EXTENDED JIB (BOOM RETRACTED)
A. Set the platform at a 88.4 ft radius from the truck center of rotation as shown
in Figure 3.
B. Raise the platform arm to its maximum angle; refer to the platform operation
label for operation details.
C. Lower boom to minus 5.2 degrees on LMI display, align jib and platform
D. Extend boom to 39.9 ft radius on LMI display
E. Lower platform arm hook into jib head, insert and secure horizontal pin