Elliott E190, Руководство по эксплуатации и обслуживанию

Страница: 219 / 358

Five Section Boom Operation-aerial EEC-0080 V1.3
Five Section Boom Operation
Front Bottom Pad Replacement

Extend boom approximately 4 feet (120cm) out.

Remove cable guides and upper spacer bars from front of boom sections.

Loosen and remove hex nuts on retract cables on the front of the 1
st
and 2
nd
sections.

Using an appropriate lifting device, sling around the 4
th
and 5
th
depending on
configuration section boom and lift it up until weight is removed from the bottom
pads in the front of the interior sections.

Loosen and remove the capscrews holding the pad doubler plates in the front of
the sections. Remove plates. Remove pads from these plates. Note all pad
locations and tag accordingly.

Inspect pads for wear using previously mentioned inspection criteria.

Install new pads on plates or boom sections. Reassemble plates in boom in
proper locations.