Elliott E190, Руководство по эксплуатации и обслуживанию

Страница: 57 / 358

LMI Setup EEC-0002 V1.1
LMI Setup
the manufacturer’s insert under the “Component Service Manuals” section of this
operator’s manual.
1. Turning on the PTO switch inside the truck’s cab. This engages PTO, and
powers the aerial unit to master power. In turn, this activates the LMI system.
2. Once the unit is powered on, the following screen will appear:
This screen is to confirm that all four outriggers are extended to the full span
position. Once the outriggers are extended to full span, follow the onscreen
prompt, “Press to Confirm Selection”, and press the bottom right button.
NOTE: The yellow arrow denotes the selection knob, and contains the same
functionality as using the soft keys. The operator turns the knob left or right to
scroll through the options, and pressing in selects the option.
3. The next screen prompts the operator to select whether the aerial device will
perform Aerial duties (person inside basket), or Material Handling duties. Press
one of the indicated buttons on either the bottom left or bottom right of the screen
(as shown on the following page):