CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
82 / 144
EN
6.3.4.2.
Partition 1 (P1) / 2 (P2)
The parameter allows assigning particular monitoring partitions to outputs.
6.3.4.3.
Activation time
The parameter defines the time the output is to be active.
6.3.4.4.
Bistable
The parameter allows set bistable mode of the output. In this mode, the output will be
switched on for the duration of the state specified in the "Output Type".
If you set the output type as "unused", the output state can be changed only with remote
command.
6.3.5.
Remote controllers
Configurator allows adding and configuring remote controllers in the same way as it was
done in the Wireless Inputs configuration. In order to add a remote controller, User has to
select a row corresponding to desired remote controller and press the
Add Device
button.
New window will appear, where necessary serial port configuration and service code
parameters have to be filled in. Pressing OK will invoke new window indicating, that
control panel is waiting for incoming transmission from the remote controller. User has to
press one of the controller button, in order to bind it with the Alarm Control panel.
Device’s ID and serial number will appear. To accept, press
Add Device.
New remote
controller has been added in the previously selected row.
