CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
48 / 144
EN
Using following commands, the installer can set up text messages and get the
information about it.
Setting the phone number
Format
XXXX SETTELNUM=ID,NUMBER
Command description Setting the phone number for pointed index on the phone
number list
XXXX – service code (ATS) or admin code or installer code
(administrator has to grant him necessary permission
first)
ID – index of phone number on the list, possible values: 1
to 10
NUMBER – phone number, on which the texts will be send
Example: 1234 SETTELNUM=3,800123456
Feedback message
description
SETTELNUM:OK – command accepted
SETTELNUM:ERROR – command rejected by the system
Getting the phone number
Format
XXXX GETTELNUM=ID
Command description
Getting the phone number for pointed index on the phone
number list
XXXX – service code (ATS) or admin code or installer code
(administrator has to grant him necessary permission
first)
ID – index of phone number on the list, possible values: 1
to 10
Example: 1234 GETTELNUM=2
Feedback message
description
GETTELNUM=ID,NUMBER – information about phone
number
GETTELNUM:ERROR – command rejected by the system
