CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
51 / 144
EN
Getting a text message content and a phone number assigned to the
event
Format
XXXX GETUSERSMS=EVENT
Command description
Getting the content of a text message and a phone
number assigned to the specified event.
XXXX – service code (ATS) or admin code or installer
code (administrator has to grant him necessary
permission first)
EVENT – a short name of the event, possible event names
are listed at the end of this chapter
Example:
1234 GETUSERSMS=ARM1
Feedback message
description
GETUSERSMS=EVENT:TELNUM,MSG_ID – information
about text message and phone number assigned to the
event
GETUSERSMS=EVENT:ERROR – command rejected by the
system
Acquiring the state of partitions
Format
XXXX GETARMED
Command description
Acquiring the information which partitions are
armed/disarmed
XXXX – service code (ATS) or admin code or installer code
(administrator has to grant him necessary permission
first)
Example: 1234 GETARMED
Feedback message
description
PARTITION1:X, PARTITION2:Y – Information about
partitions arm/disarm state.
PARTITION1,PARTITION2 – default partitions names,
they can be changed with the SETNAME command
X,Y – partition states, possible values:
0 – disarmed
1 – armed
GETARMED:ERROR – command rejected by the system
