CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
76 / 144
EN
Enter the serial number S/N located on the label of the detector. The next box refers to
the zone (input) number, which can be assigned. The device type will appear
automatically when the first two digits are entered. After filling this field, press the “OK”
button.
Now for the detector to be seen by the panel, this information must be sent by pressing
Write
on Quick Access bar (or Operations -> Write). A window will pop up:
where one have to mark the third checkbox "Write Wireless Devices (only for CPX)” and
press ”Write”. From now on, the detector and the control panel will communicate with
each other correctly.
NOTE: To receive the control panel signals from the detector it is
necessary to enter the correct serial number.
The second way is to directly register the detector in the control panel.
To add a wireless detector press the "Register Device" button.
