CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
50 / 144
EN
Assigning a text message and a phone number to the event
Format
XXXX SETUSERSMS=EVENT,TELNUM,MSG_ID
Command description
Assigning a text message and a phone number to the
event. The text will be send to the phone number when
this event occurs.
XXXX – service code (ATS) or admin code or installer
code (administrator has to grant him necessary
permission first)
EVENT – a short name of the event, possible event names
are listed at the end of this chapter
TELNUM – ten-digit chain of zeroes and ones. Each digit
(counting from the left) represents an index of the phone
number – first digit for the first phone number, second
digit for the second number, and so on.
0 – message will not be send to this number
1 – message will be send to this number
Example:
1234 SETUSERSMS=ARM1,1000000110,6
Means, that when ARM1 event occurs (partition 1 armed),
text message number 6 will be sent to phone numbers
with indexes 1,8 and 9.
Feedback message
description
SETUSERSMS=EVENT,TELNUM,MSG_ID:OK – command
accepted
SETUSERSMS=EVENT,TELNUM,MSG_ID:ERROR –
command rejected by the system
