Draytek Vigor2912 Series, Руководство пользователя

Страница: 315 / 422

Vigor2912 Series User’s Guide 305
especially useful in the case of abnormal VPN IPsec tunnel
disruption. For details, please refer to the note below.
Check to enable the transmission of PING packets to a
specified IP address.
Enable PING to keep alive is used to handle abnormal
IPsec VPN connection disruption. It will help to provide the
state of a VPN connection for router’s judgment of redial.
Normally, if any one of VPN peers wants to disconnect the
connection, it should follow a serial of packet exchange
procedure to inform each other. However, if the remote peer
disconnect without notice, Vigor router will by no where to
know this situation. To resolve this dilemma, by
continuously sending PING packets to the remote host, the
Vigor router can know the true existence of this VPN
connection and react accordingly. This is independent of
DPD (dead peer detection).
PING to the IP - Enter the IP address of the remote host
that located at the other-end of the VPN tunnel.
Dial-Out Settings Type of Server I am calling - PPTP - Build a PPTP VPN
connection to the server through the Internet. You should
set the identity like User Name and Password below for the
authentication of remote server.
IPsec Tunnel - Build an IPsec VPN connection to the
server through Internet.
L2TP with IPsec Policy - Build a L2TP VPN connection
through the Internet. You can select to use L2TP alone or
with IPsec. Select from below:

None: Do not apply the IPsec policy. Accordingly, the
VPN connection employed the L2TP without IPsec
policy can be viewed as one pure L2TP connection.

Nice to Have: Apply the IPsec policy first, if it is
applicable during negotiation. Otherwise, the dial-out
VPN connection becomes one pure L2TP connection.

Must: Specify the IPsec policy to be definitely
applied on the L2TP connection.
User Name - This field is applicable when you select,
PPTP or L2TP with or without IPsec policy above. The
length of the name is limited to 49 characters.
Password - This field is applicable when you select PPTP
or L2TP with or without IPsec policy above. The length of
the password is limited to 15 characters.
PPP Authentication - This field is applicable when you
select, PPTP or L2TP with or without IPsec policy above.
PAP/CHAP/MS-CHAP/MS-CHAP2 is the most common
selection due to wild compatibility.
VJ compression - This field is applicable when you select