com
.
tom
INDUSTRY 100.WLAN.W
Start-up Guide
The com.tom device communicates with the com.tom PORTAL via
Wi-Fi or Ethernet. The communication mechanism has a low data
volume and can be integrated easily in existing network infrastruc-
tures.
The device may be put into service and
operated by qualified personnel only.
The device is designed for an installation on a
grounded 35 mm DIN rail in dry rooms.
The power supply of the device must be a
grounded circuit PELV (connection between
functional earth and ground). The power
supply must be a limited power source ac-
cording to the EN60950-1 chap. 2.5 or must
be provided with an anti-surge fuse of 2 A.
Never use the device in areas where the operation of wireless
equipment is prohibited. The adherence of the protection against
the lightning norm VDE V 0185 is mandatory when installing the
antenna outside. The E.M.C lightning zone concept must be con-
sidered. The device must be deactivated while working with the
antenna.
Pin Assignment
Power Supply
PIN
Description
FE Functional
earth
GND
Ground
VCC 24
VDC
Serial Interface (COM)
Pin
RS232
RS485
Pin 1
GND
GND
Pin 2
CTS
-
Pin 3
-
B (+/Z)
Pin 4
Tx
-
Pin 5
-
A (-/Y)
Pin 6
RTS
-
Pin 7
-
TERM_B
Pin 8
Rx
-
CAN Interface
Pin
Description
Pin 1
CAN High
Pin 2
TERM
Pin 3
CAN Low
Pin 4
TERM
Ethernet Interface
Green LED
Link indication
Yellow LED
Activity indication
Status LEDs
PLC
PLC status
Portal Portal
status
WiFi
Wi-Fi status
LED 4
Freely programmable
Power
Device is powered
Other Interfaces
SD card interface
microSD card
USB interface
Micro USB (OTG Host & Slave)
Antenna interface
SMA connector (female)
Getting Started
Wire the com.tom device according to the specifications.
Afterwards get the
WEB-PLC Getting Started
documentation
at http://www.com-tom.de/start and follow the steps described
there to put your com.tom device into operation.
General Data
Size (W x L x H)
46 x 103 x 63 mm
Operating temperature
0 bis 55 °C
Electrical shock
Class III
Protection rating
IP20
EMC emission
IEC 61000-6-3
EMC immunity
IEC 61000-6-2
Compliance
CE, RoHS
Electrical Data
Supply voltage
24 VDC (
15 %)
Active current
< 120 mA
Scope of supply
1 Piece
CTI 100.WLAN.W
1 Piece
microSD card
1 Piece
Start-up guide
1 Piece
Connector 3-pin
1 Piece
Connector 8-pin
1 Piece
Connector 4-pin
1 Piece
Label MAC-ID
Copyright © 2017 Beck IPC GmbH
http://www.com-tom.de
