Draytek Vigor2912 Series, Руководство пользователя

Страница: 193 / 422

Vigor2912 Series User’s Guide 183
Each item is explained as follows:
Item Description
Index Display the number of the profile.
Service Name Display the description of the specific network service.
WAN Interface Display the WAN IP address used by the profile.
Protocol Display the transport layer protocol (TCP or UDP).
Public Port Display the port number which will be redirected to the
specified
Private IP and Port of the internal host.
Private IP Display the IP address of the internal host providing the
service.
Status Display if the profile is enabled (v) or not (x).
Press any number under Index to access into next page for configuring port redirection.
Available settings are explained as follows:
Item Description
Enable Check this box to enable such port redirection setting.
Mode Two options (Single and Range) are provided here for you
to choose. To set a range for the specific service, select
Range . In Range mode, if the public port (start port and end
port) and the starting IP of private IP had been entered, the
system will calculate and display the ending IP of private IP
automatically.
Service Name Enter the description of the specific network service.
Protocol Select the transport layer protocol (TCP or UDP).
WAN IP Select the WAN IP used for port redirection. There are
eight WAN IP alias that can be selected and used for port
redirection. The default setting is
All which means all the
incoming data from any port will be redirected to specified