29
ENGLISH
REMOTE SENSOR
OPEN / CLOSE
PLAY
STOP
DVD
OPTICAL
COAXIAL
SOURCE
POWER
PURE DIRECT
DVD AUDIO
AL24 PLUS
OFF
MODE 1
MODE 2
REMOTE SENSOR
B
DVD AUDIO-VIDEO PLAYER
DVD-A1
4
15
USING THE PURE DIRECT MODE
2
In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving high
quality sound.
1
Press the PURE DIRECT MEMORY button on the
remote control unit.
• The output status of the video signals, etc., can be
stored at MODE 1 and MODE 2 as desired.
REMOTE CONTROL UNIT
POWER
ON
POWER
OFF
OPEN /
CLOSE
NTSC /
PAL
DISPLAY
SUBTITLE
ANGLE
SKIP
SLOW / SEARCH
MENU
RETURN
PURE DIRECT
MEMORY
PICTURE
ADJUST
DIMMER
ZOOM
PROG/DIR
CLEAR
CALL
MARKER
REPEAT
A-B
RANDOM
V.S.S.
SETUP
PAGE -
PAGE +
1
2
3
4
5
6
7
8
9
0
SEARCH MODE
AUDIO
STOP
PLAY
STILL / PAUSE
TOP MENU
+10
ENTER
1, 3
2
2
SE TUP
SE L EC T :
DE C I S I ON : ENT E R BUT TON
PURE D I RE C T MODE
PURE D I RE C T MEMORY
PURE D I RE C T MODE 1
D I G I TAL OUTPUT
V I DEO OUT
D I SP L AY
MODE 1
MODE 2
ON
ON
ON
PURE DIRECT
MEMORY
Remote control unit
2
Use the
•
and
ª
cursor buttons to select the mode,
then press the ENTER button.
DIGITAL OUTPUT
ON:
Digital audio signals are output.
OFF: Digital audio signals are not output.
VIDEO OUT
ON:
Video signals are output.
OFF: Video signals are not output.
DISPLAY
ON:
It is indicate in Display of the main unit.
OFF: It is not indicate in Display of the main unit.
SE TUP
SE L EC T :
DE C I S I ON : ENT E R BUT TON
PURE D I RE C T MODE
PURE D I RE C T MEMORY
PURE D I RE C T MODE 1
D I G I TAL OUTPUT
V I DEO OUT
D I SP L AY
MODE 1
ON
O F F
Remote control unit
ENTER
Remote control unit
Press the PURE DIRECT MEMORY button on the
remote control unit.
• All of the settings are stored in the memory.
3
Remote control unit
PURE DIRECT
MEMORY
Switch the PURE DIRECT switch on the main unit.
OFF:
All signals are output normally.
MODE 1: The settings stored for MODE 1 are
used.
The factory default settings are:
“DIGITAL OUT”: “ON”
“VIDEO OUT”: “ON”
“DISPLAY”: “ON”
MODE 2: The settings stored for MODE 2 are
used.
The factory default settings are:
“DIGITAL OUT”: “ON”
“VIDEO OUT”: “ON”
“DISPLAY”: “ON”
4
Main unit
PURE DIRECT
OFF
MODE 1
MODE 2
REMOTE SENSOR
OPEN / CLOSE
PLAY
STOP
DVD
OPTICAL
COAXIAL
SOURCE
POWER
PURE DIRECT
DVD AUDIO
AL24 PLUS
OFF
MODE 1
MODE 2
REMOTE SENSOR
B
DVD AUDIO-VIDEO PLAYER
DVD-A1
1
16
USING THE DVD-A1 AS A D/A CONVERTER
2
The DVD-A1 can be used as a D/A converter by connecting it to an external digital component using the
digital connectors.
1
Set the source selector to either “OPTICAL” or
“COAXIAL”.
• “– –” appears in the track number display section.
The sampling frequency of the external input signal is
then displayed. (“– –” is displayed if the sampling
frequency cannot be detected.)
DVD
OPTICAL
COAXIAL
SOURCE
Main unit
NOTES:
• D/A conversion is only possible with 16- to 24-bit, 32 to 96 kHz PCM signal sources.
Dolby Digital and DTS etc. bitstream signals cannot be converted.
• When the source selector is set to “OPTICAL” or “COAXIAL”, only the power button and the
OPEN/CLOSE button will work.
• The stop mode is set if the source selector is switched to “OPTICAL” or “COAXIAL” during playback.
• Noise will be output if the digital data of a CD-ROM, etc., is input.
• The digital data input from the digital input terminal is output from the digital output terminal as such.
(The data is output regardless of the “PURE DIRECT MODE” setting.)
