Delta Ultron DPM Series, Руководство пользователя

Страница: 164 / 264

6 - 2 4
Ultron DPM series
6.2.5 ECO Mode Start-up Procedures
WARNING:
1. For parallel units, please follow 6.2.3 Bypass Mode Start-up Procedures
WRWXUQRQHDFKSDUDOOHO836$IWHUFRQ¿UPLQJWKDWSDUDOOHORSHUDWLRQFDQEH
normally run, follow the following procedures step by step.
2. For parallel units, ensure that every operation procedure mentioned below is
synchronized to all parallel UPSs.
)RUSDUDOOHODSSOLFDWLRQLI\RXMXVWZDQWWRRSHUDWHDVSHFL¿F836EXWQRWDOO
parallel ones, please contact service personnel.
1
Switch ON each external battery cabinet’s breaker (Q5). At this moment, the UPS’s
WULFRORU/('LQGLFDWRULVRႇ)RUWKHWULFRORU/('LQGLFDWRU¶VORFDWLRQSOHDVHUHIHUWR
Figure 2-13 .
2
(a) Single Input:
Switch ON the external maintenance bypass cabinet’s input breaker (Q1) and output
EUHDNHU4$IWHUWKDWWKH/&'ZLOOEHRQVHHWKH¿JXUHEHORZDQGWKHWULFRORU/('
indicator will illuminate yellow.
After 1 minute of LCD initialization, the LCD will enter the Main Screen as shown in the
¿JXUHEHORZ1RZWKHE\SDVVVWDWLFVZLWFKLFRQ LOOXPLQDWHVJUHHQWKHUHFWL¿HU
starts running and establishing the DC BUS voltage, but the charger converter has not
charged the batteries yet. During this time, the tri-color LED indicator remains yellow.