Delta Ultron DPM Series, Руководство пользователя

Страница: 96 / 264

5 - 8
Ultron DPM series
1250kW
NOTE:
For 1000kW UPS, there is no this power module. However, the locations
and total Q’ty of the four fasteners are the same as 1250kW UPS. Thus,
in
Figure 5-6 , only the illustration of 1250kW UPS is taken for example.
Turn the Fastener
Use the M8 Hexagon Socket Screw (that You
Just Removed) to Fix the Fastener on the Top
of the Power Modules so the UPS System
Cabinet and Power Modules Can be Joined
Together.
Fasten the M8 Hexagon Socket Screw
(that You Just Loosened) to Fix the Fastener.
(Top of the Power Modules) (Top of the Power Modules) (Top of the UPS System Cabinet)
1
2
3
(Figure 5-6: Turn the Four Fasteners and Use the Four Fasteners to Join the Top of the
UPS System Cabinet and the Top of the Power Modules Together)
5
For 1000kW UPS, there are eight and sixteen balance supports at the bottom of
the UPS system cabinet and the power modules respectively. Please use a 0.7" (19
mm) socket wrench and twenty-four M12 expansion screws (provided by the service
SHUVRQQHOWR¿[DOORIWKHEDODQFHVXSSRUWVRQWKHJURXQG
For 1250kW UPS, there are eight and twenty balance supports at the bottom of the
UPS system cabinet and the power modules respectively. Please use a 0.7" (19 mm)
socket wrench and twenty-eight M12 expansion screws (provided by the service
SHUVRQQHOWR¿[DOORIWKHEDODQFHVXSSRUWVRQWKHJURXQG
Please refer to Figure 5-7 ~ Figure 5-9
WR¿UPO\¿[WKHEDODQFHVXSSRUWVRIWKH836
system cabinet and power modules on the ground.