Delta Ultron DPM Series, Руководство пользователя

Страница: 100 / 264

5 - 1 2
Ultron DPM series
c. Remove the power modules’ front panels. Each of the front panels has four M5
screws and six M4 screws. Please see Figure 5-12 .
NOTE:
For 1000kW UPS and 1250kW UPS, each power module’s structure,
exterior and dimensions are the same. Only the total number of the power
modules is different. The 1000kW UPS has four power modules and
N:836KDV¿YH%HORZRQO\WKHLOOXVWUDWLRQRIN:836¶VSRZHU
modules is taken for example.
1250kW
(Front View of the Power Modules)
M5 Screw
× 2
M5 Screw
× 2
M4 Screw
× 6
Panel
× 1
NOTE:
For 1000kW UPS, there is no this power module.
(Figure 5-12: Location of the Power Modules’ Front Panels & Screws)
d. Use the two provided D-SUB15 communication cables (that have already been
attached to the CNPF411A port and CNPF410 port located at the power modules’
PF4 power boards) to respectively connect with the CNPF507 port and CNPF506
port located at the UPS system cabinet’s PF5 power board. Please refer to
Figure
5-13 .
When connecting the two provided D-SUB15 communication cables, please route
them via the snap bushings. For information about the snap bushings, please refer
to
2
.