Delta Ultron DPM Series, Руководство пользователя

Страница: 81 / 264

4 - 1 5
4 Communication Interfaces
Before shipment, the display port has been connected to the 7” touch panel with the
designated D-SUB15 communication cable in Delta factory. For how to operate the touch
panel, please refer to
7.2 How to Turn on the LCD and 7.3 ON/ OFF Button .
4.1.7 External Battery Temperature Detection Dry Contacts
EXTERNAL BATT.TEMP.DETECTION
B1 G1
B2 G2
B3 G3
B4 G4
(Figure 4-23: External Battery Temperature Detection Dry Contacts)
You can use the external battery temperature detection dry contacts (B1-G1, B2-G2, B3-G3
and B4-G4) to detect at maximum four external battery cabinets’ temperature. You need to
purchase the battery cabinet temperature sensor cable (optional).
NOTE:
If you need any optional accessories, please contact your local dealer or customer
service. Please refer to
8. Optional Accessories .
4.1.8 Output/ Input Dry Contacts
OUTPUT DRY CONTACT INPUT DRY CONTACT
G1
ID1
OD1 OD1
G2
ID2
OD2 OD2
OD3
OD4
OD3
OD4
OD5
OD6
OD5
OD6
(Figure 4-24: Output/ Input Dry Contacts)
y
Output Dry Contacts (OD1~OD6)
The UPS provides six sets of programmable output dry contacts for you to receive UPS
events. The output dry contacts are normally open and have no default setting. There
are twenty-two events for you to select, and you can choose six of them to set up the
output dry contacts. To learn more how to set up, please contact your local dealer or
customer service. For the twenty-two events, please refer to the table below.
NOTE:
Since the output dry contacts belong to the secondary circuit, the voltage of
each output dry contact’s connected device should not exceed 250Vac to avoid
HOHFWULFVKRFNDQGLQVXႈFLHQWLQVXODWLRQ