Delta Ultron DPM Series, Руководство пользователя, Страница: 71 / 264

4 - 5
4 Communication Interfaces
1000kW
PA RA
LLE L
SW ITC H
PA RA LLEL
SWI TCH
(Front View of UPS System Cabinet with Two Front Doors Open)
(Figure 4-5: Bottom Entry_ Optional Card’s
Signal Cable Routing)
(Figure 4-6: Bottom Entry & Location of Signal Cable
(User-supplied), Cable Tray and Optional Card)
Optional
Card 6
7
Signal Cable
(User-supplied) 5
Signal Cable
(User-supplied)
5
Cable
Tray
NOTE:
1. For 1000kW UPS and 1250kW UPS, their signal cable (user-supplied) connection
method and routing are the same. Thus, in Figure 4-3 , Figure 4-4 , Figure 4-5
and Figure 4-6 , only the illustration of 1000kW UPS system cabinet is taken for
example.
2. In accordance with National Electrical Codes (NEC), please install a suitable
conduit and bushing for cable protection.
3. Please refer to national and local electrical codes for acceptable cable size.
4.1.2 RS-232 Ports & USB Ports
You can use the RS-232 cable (provided) or the USB cable (not provided) to connect the
UPS’s RS-232 port or USB port with a computer and install the UPSentry 2012 software
(https://www.deltapowersolutions.com/en/mcis/software-center.php) to record UPS power
events, set up alarms, and shut down the UPS safely. If you wish to monitor several UPSs
placed in a computer room or a factory to facilitate centralized control, please contact Delta
customer service.