Delta Ultron DPM Series, Руководство пользователя, Страница: 70 / 264

4 - 4
Ultron DPM series
After you install the optional card in the SMART slot, please follow the instructions below to
route the signal cable (user-supplied).
For top entry, please route the user-supplied signal cable (
1
) through the top cover (
2
)
and the cable tray ( 3 ), and connect the cable ( 1 ) to the optional card ( 4 ). Please refer to
Figure 4-3 and Figure 4-4 .
1000kW
PA
RA LLE L
SW ITC H
PA
RA LLE
L
SWITCH
3 1
Cable
Tray
4
Optional
Card
Top
Cover
2
Signal Cable
(User-supplied)
1
Signal Cable
(User-supplied)
(Front View of UPS System Cabinet with Two Front Doors Open)
(Figure 4-3: Top Entry_
Optional Card’s Signal Cable Routing)
(Figure 4-4: Top Entry & Location of Signal Cable
(User-supplied),Top Cover, Cable Tray and Optional Card)
For bottom entry, please route the user-supplied signal cable (
5
) through the cable tray (
6
) and
connect the cable ( 5 ) to the optional card ( 7 ). Please refer to Figure 4-5 and Figure 4-6 .