WHAT’S INCLUDED
LET’S GET STARTED
BBU-8733 Quick Start Guide
UPS Battery Backup System for the MT8733 Cable Modem Router with Voice
Battery Pack
Mounting Plate
AC Power Cord
Connecting Cable
UPS Power Unit
Attach Battery to UPS Power Unit to create the UPS Backup
Battery System
1. Remove and discard the plastic protective cover from the connector located on
the top of the UPS Power Unit and also on the Battery Pack.
2. Place the Battery Pack onto the back of the UPS Power Unit as shown, then then
slide the blocks together until they are neatly stacked and aligned. [See image 1]
For additional detail, refer to Figures 1, 2, and 3 of the Installation section in the
included User’s Manual.
3.
Optional:
Repeat the previous step to add additional batteries. You can stack a
total of 3 batteries on the UPS Power Unit for up to 24 hours of backup.
Remove all protective plastic connector covers before connecting.
Tabletop usage
To use the UPS Backup Battery System in a tabletop or other surface orientation:
1. Place the Mounting Plate onto the bottom of the UPS Backup Battery System,
ensuring the tabs are aligned.
2. Slide the Mounting Plate and UPS Backup Battery System together. [See image 2]
1
2
