Steps
1.
Connect the PERC LED cable to the LED cable connector on the PERC card.
2.
Insert the PERC card in the PERC card slot.
3.
Press and slide the tab on the PERC card lock to disengage it from the slot on the chassis.
4.
Turn the internal PERC card lock to engage it with the PERC card.
5.
Install the first screw to secure the PERC card lock to the PERC card.
6.
Install the second screw to secure the PERC card to the chassis.
NOTE: Use the two screws supplied with the system to secure the PERC card to the PERC card
lock and the chassis
7.
Connect the PERC LED cable to the LED cable connector on the system board.
Next steps
1.
Install the expansion card riser.
2.
Follow the procedure listed in
After working inside your system
.
Related Tasks
Removing the expansion card riser
Installing the expansion card riser
iDRAC port card (optional)
The iDRAC port card consists of the SD vFlash card slot and an iDRAC port. The iDRAC port card features
a dedicated NIC port and is used for remote, advanced management of the system through the network.
An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port
card. It provides persistent on-demand local storage and a custom deployment environment that enables
automation of server configuration, scripts, and imaging. It emulates a USB device. For more information,
see the Integrated Dell Remote Access Controller User's Guide at
Dell.com/idracmanuals
.
Replacing an optional SD vFlash card
1.
Locate the SD vFlash card slot at the back of the chassis.
2.
To remove the SD vFlash card, push the SD vFlash card inward to release it, and pull the SD vFlash
card from the SD vFlash card slot.
91
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
