Figure 32. Replacing the internal USB key
1.
USB memory key
2. USB memory key connector
Next steps
1.
Install the expansion card riser.
2.
Follow the procedure listed in
After working inside your system
.
3.
While booting, press F2 to enter System Setup and verify that the system detects the USB key.
Related Tasks
Removing the expansion card riser
Installing the expansion card riser
Expansion cards and expansion card riser
NOTE: A System Event Log (SEL) is logged if an expansion card riser is unsupported or missing. It
does not prevent your system from turning on and no BIOS POST message or F1/F2 pause is
displayed.
NOTE: The expansion card riser is optional for systems with four hard drives.
Expansion card installation guidelines
Your system supports PCIe Express Generation 3 cards. The following table provides riser configurations
for R330 systems:
83
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
