Dell PowerEdge R330, Руководство пользователя

Страница: 18 / 160

Item Indicator, button, or
connector
Icon Description
system status indicator on the back flash until one
of the buttons is pressed again.
Press the system identification button to turn the
system ID on or off.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup),
press and hold the button for more than 15
seconds.
9 System identification
connector Connects the optional system status indicator
assembly through the optional cable management
arm.
10 Video connector Enables you to connect a VGA display to the
system.
NIC indicator codes
Figure 7. NIC indicators
1. link indicator 2. activity indicator
Table 8. NIC indicators
Convention Indicator pattern Description
A Link and activity indicators
are OFF The NIC is not connected to the network.
B Link indicator is green The NIC is connected to a valid network at its maximum
port speed (1 Gbps).
18