Dell PowerEdge R330, Руководство пользователя

Страница: 134 / 160

Steps
1.
Disconnect the keyboard and/or mouse cables from the system and reconnect them.
2. If the problem persists, connect the keyboard and/or mouse to another USB port on the system.
3. If the problem is resolved, restart the system, enter System Setup, and check if the non-functioning
USB ports are enabled.
NOTE: Older operating systems may not support USB 3.0.
4. Check if USB 3.0 is enabled in System Setup. If enabled, disable it and see if the issue is resolved.
5. In iDRAC Settings Utility , ensure that USB Management Port Mode is configured as Automatic or
Standard OS Use .
6. If the problem is not resolved, replace the keyboard and/or mouse with a known working keyboard
or mouse.
If the problem is not resolved, proceed to step 7 to troubleshoot other USB devices attached to the
system.
7. Turn off all attached USB devices, and disconnect them from the system.
8. Restart the system.
9. If your keyboard is functioning, enter System Setup, verify that all USB ports are enabled on the
Integrated Devices screen. If your keyboard is not functioning, use remote access to enable or
disable the USB options.
10. Check if USB 3.0 is enabled in System Setup. If it is enabled, disable it and restart your system.
11. If the system is not accessible, reset the NVRAM_CLR jumper inside your system and restore the
BIOS to the default settings.
12. In the IDRAC Settings Utility , ensure that USB Management Port Mode is configured as Automatic
or Standard OS Use .
13. Reconnect and turn on each USB device one at a time.
14. If a USB device causes the same problem, turn off the device, replace the USB cable with a known
good cable, and turn on the device.
Next steps
If all troubleshooting fails, see Getting Help .
Troubleshooting iDRAC Direct (USB XML configuration)
For information on USB storage device and server configuration, see the Integrated Dell Remote Access
Controller User's Guide at Dell.com/esmmanuals .
Steps
1.
Ensure that your USB storage device is connected to the front USB Management Port, identified by
icon.
2. Ensure that your USB storage device is configured with an NTFS or an FAT32 file system with only
one partition.
3. Verify that the USB storage device is configured correctly. For more information about configuring
the USB storage device, see the Integrated Dell Remote Access Controller User's Guide at
Dell.com/
esmmanuals .
4. In the iDRAC Settings Utility , ensure that USB Management Port Mode is configured as Automatic
or iDRAC Direct Only .
5. Ensure that the iDRAC Managed: USB XML Configuration option is either Enabled or Enabled only
when the server has default credential settings .
6. Remove and reinsert the USB storage device.
134