Dell PowerEdge R330, Руководство пользователя

Страница: 34 / 160

Option Description
Internal USB Port Enables or disables the internal USB port. This option is set to Enabled by default.
Integrated
Network Card 1 Enables or disables the integrated network card.
Embedded NIC1
and NIC2
NOTE: The Embedded NIC1 and NIC2 options are only available on systems
that do not have
Integrated Network Card 1 .
Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled , the
NIC may still be available for shared network access by the embedded
management controller. The embedded NIC1 and NIC2 options are only available
on systems that do not have Network Daughter Cards (NDCs). This option is
mutually exclusive with the Integrated Network Card 1 option. Configure this
function by using the NIC management utilities of the system.
Embedded Video
Controller Allows you to enable or disable the Embedded Video Controller option. This
option is set to Enabled by default.
Current State of
Embedded Video
Controller Displays the current state of the embedded video controller. The Current State of
Embedded Video Controller option is a read-only field. If the Embedded Video
Controller is the only display capability in the system (that is, no add-in graphics
card is installed), then the Embedded Video Controller is automatically used as the
primary display even if the Embedded Video Controller setting is set to Disabled .
OS Watchdog
Timer
If your system stops responding, this watchdog timer aids in the recovery of your
operating system. When this option is set to Enabled , the operating system
initializes the timer. When this option is set to Disabled (the default), the timer does
not have any effect on the system.
Memory Mapped
I/O above 4 GB
Enables or disables the support for PCIe devices that require large amounts of
memory. This option is set to Enabled by default.
Slot Disablement Enables or disables the available PCIe slots on your system. The slot disablement
feature controls the configuration of PCIe cards installed in the specified slot. Slot
disablement must be used only when the installed peripheral card prevents booting
into the operating system or causes delays in system startup. If the slot is disabled,
both the Option ROM and UEFI drivers are disabled.
Serial Communication screen details
You can use the Serial Communication screen to view the properties of the serial communication port.
To view the Serial Communication screen, click System Setup Main Menu → System BIOS → Serial
Communication .
The Serial Communication screen details are explained as follows:
Option Description
Serial
Communication
Selects serial communication devices (Serial Device 1 and Serial Device 2) in BIOS.
BIOS console redirection can also be enabled and the port address can be
specified. This option is set to
Auto by default.
Serial Port
Address
Enables you to set the port address for serial devices. This option is set to Serial
Device 1=COM2, Serial Device 2=COM1 by default.
NOTE: You can use only Serial Device 2 for the Serial Over LAN (SOL) feature.
To use console redirection by SOL, configure the same port address for
console redirection and the serial device.
34