CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures must be
performed only by Dell certified service technicians.
Steps
1.
Locate the battery socket. For more information, see
System board connectors
.
CAUTION: To avoid damage to the battery connector, you must firmly support the connector
while installing or removing a battery.
2.
Use a plastic scribe to pry out the system battery as shown in the following illustration:
Figure 46. Removing the system battery
1.
plastic scribe
2. positive side of the battery connector
3. securing tabs
3.
Install a new system battery by holding the battery with the "+" sign facing up and slide it under the
securing tabs.
4.
Press the battery into the connector until it snaps into place.
Figure 47. Installing the system battery
1.
positive side of the battery connector
2. battery connector
109
Содержание PowerEdge R330
Страница 1: ...Dell PowerEdge R330 Owner s Manual Regulatory Model E34S Series Regulatory Type E34S001 ...
Страница 22: ...22 ...
